Chemical Dosing And Metering Pumps

Product Details:

We are offering Xeed Chemical Dosing Pump to our clients.

XEED XM pumps (Capacity - 15 LPH up to 100 LPH) are motor driven and the diaphragm is actuated by a gear drive. The gear box consists of a worm shaft, a worm wheel and cam mechanism. All the shafts are loaded on "Twin Bearing Support" (TBS) which results in precise & consistent operation. Moreover, wear & tear is minimal due to proper meshing of well lubricated worm shaft and worm wheel. Flow rate can be adjusted between 10% to 100% on the rated capacity against the rated back pressure by a stroke adjustment knob. The pump can also be automated to accept 4-20mA through a variable frequency drive.

Additional Information:

• Delivery Time: 1-5 weeks
• Packaging Details: corrugated box

Product Details:

We offer a range of EMEC Chemical Dosing Pump containing IP 65 enclosure results in longer life and durability in water splashes Environmental changes.

 

The available range of chemical dosing pump:

• LPN to 1000 LPH
• Pumps available for viscous liquid too (up to 50000 cPs)
• Pumps available for 4 LPH @ 100 bar
• Pumps available for Auto pH correction, Auto ORP etc. 

 

Multiple digital controller system for managing up to 5 channels that can be programmed to control:

• pH
• ORP (ORP)
• Chlorine (total, free and combined)
• Chlorine Dioxide
• Hydrogen Peroxide
• Ozone
• Peracetic acid
• Turbidity
• Conductivity
• Dissolved oxygen

 

Available Range:

• 8 gm/hr to 1000 gm/hr

Additional Information:

• Delivery Time: Ex Stock
• Packaging Details: Box Packing

Product Details:

PRISMA is a stepper motor-driven diaphragm dosing pump. Microprocessor-controlled stepper motor ensures an accurate and smooth dosing.

The position and the speed of the diaphragm are controlled by the microprocessor during the entire discharge/suction cycle. The slow motion mode enables reduction of the suction speed allowing better priming of viscous liquids.

PRISMA stepper motor-driven pump gives you the most accurate dosing, providing an outstanding 1:4800 turndown ratio offering the most homogeneous and precise distribution of the chemical dosed according to the required application.

Installation kit provided ensures the best outcome and quick installation.

PRISMADOSING PUMP

PRISMA is a stepper motor-driven diaphragm dosing pump. Microprocessor-controlled stepper motor ensures an accurate and smooth dosing.

The position and the speed of the diaphragm are controlled by the microprocessor during the entire discharge/suction cycle. The slow motion mode enables reduction of the suction speed allowing better priming of viscous liquids.

PRISMA stepper motor-driven pump gives you the most accurate dosing, providing an outstanding 1:4800 turndown ratio offering the most homogeneous and precise distribution of the chemical dosed according to the required application.

Installation kit provided ensures the best outcome and quick installation.

FEATURES

•   Foot mounted
•   LCD display
•   Microprocessor technology
•   Double ball check valve
•   Electronic stroke speed adjustment
•   PTFE membrane

FUNCTIONS

•   Alarms
•   Level control
•  Stand-by
•  MULTIFUNCTION (Constant – Constant with external input – ppm – % – mlq – Pause-work – Weekly – mA – Pulse – Volt – external Batch – manual Batch)
•  Pump status indicated by multicolor display: pump running (green); stand-by (white); warning condition (yellow); alarm condition (red)
•  SLOW MODE

EQUIPMENTLevel controlStand-by inputAlarm outputFLOW - Manual venting PUMP HEADS

•  PVDF
•  SS
•  PMMA

Additional Information:

• Delivery Time: 5-6 weeks
• Packaging Details: corrugated box packing

Product Details:

DOSATRON- Made in FRANCE- NSF APPROVED

Water-powered proportional dosing pumps/ no electricity required to run dosing pump.

The DOSATRON water powered dosing pump is a simple and ingenious system that has demonstrated its worth since many decades in about a hundred countries.

Installed directly in the water supply line, the Dosatron operates without electricity ; it uses the flow of water as the power source. The water activates the Dosatron, which takes up the required percentage of concentrate and injects it into the water.

 

Inside the Dosatron, the concentrate is mixed with the water, and the water pressure forces the solution downstream. Once adjusted, the dispenser requires no action or external control.

The dose of concentrate will be directly proportional to the volume of water entering the Dosatron, regardless of variations in flow and pressure which may occur in the main line.

The high dosing precision eliminates all risks of overdosing, thus contributing to respecting the environment.

Product Details:

We are offering highly efficient Electronic Dosing Pump. The pumps are designed to excellence, our Electronic Dosing Pump is known for its longer service life and efficient performance. Our Electronic Dosing Pump always remains high on demands owing to its heavy-duty work and low operating cost. We offer Electronic Dosing Pump in different specification to cater to the divergent demands of the clients. Electronic Dosing Pump is electronically actuated diaphragm type dosing pumps.

 

Dosing pump range:- Model:- EXAT 0406- Flow 6 LPH @ 4 kg/cm2

Additional Information:

• Delivery Time: 3-5 WEEKS
• Packaging Details: WOODEN BOX

Product Details:

The PeriBest peristaltic pumps have been designed and manufactured to solve a wide range of highly demanding applications within the Water treatment market and industry in general, such as Chemical, Food & Beverage, Paper and Ceramics, Mining and Construction. 

The development of the equipment is based on an extremely heavy-duty design with XXL rollers, the latest generation peristaltic hose with longer service life and quick and simple assembly, commissioning and maintenance that notably reduce downtimes and improve operating costs.

This highly competitive and effective development has been achieved through strong knowledge of peristaltic technology and its limits and requirements. This has led to a differentiated product with large competitive advantages compared with the traditional competition in this sector. 

Innovation, quality and technology are essential conditions for the development of the new PeriBest Pumps product line.

Additional Information:

• Delivery Time: 6-8 weeks
• Packaging Details: wooden packing

Product Details:

 BYPASS PIPING SYSTEM FOR CORROSION COUPONS RACK

• PVC body.
• Pipes: DN40 - PN16.
• 4 corrosion coupon points.
• Panel mounting sizes: 600 mm x 900 mm.
• Quick connect sample points (no tools tequired).
• Inlet/outlet isolation valves.
• Flow indicator.
• Y-Strainer (option).
• Drain valve.
• Temperature rating: max 40°C ( 104°F).

Additional Information:

• Delivery Time: 5-7 weeks
• Packaging Details: box packing