Auto Chemical Dosing Pumps, Sensors and Controller

Product Details:

LDS control instruments are a series of single reading controllersthat meet a wide range of applications.
LDS has: easy control by encoder wheel, flow control, local & remotecontrol, ERMES web communication, permanent data storagewith system log, PT100 temperature probe, stand-by input,alarms, programmable delay at dosing start-up (up to 60 minutes),automatic temperature compensation, probe readout menu (LDSCDIND),different working modes (on/off, impulsive proportional,proportional PWM and fixed PWM), automatic or manual dosingactivity and mA output (optional).

Additional Information:

• Item Code: LDSETORB2
• Delivery Time: 5-7 weeks
• Packaging Details: Corrugated box

Product Details:

LDS control instruments are a series of single reading controllersthat meet a wide range of applications.

LDS has: easy control by encoder wheel, flow control, local & remotecontrol, ERMES web communication, permanent data storagewith system log, PT100 temperature probe, stand-by input,alarms, programmable delay at dosing start-up (up to 60 minutes),automatic temperature compensation, probe readout menu (LDSCDIND),different working modes (on/off, impulsive proportional,proportional PWM and fixed PWM), automatic or manual dosingactivity and mA output (optional).

Additional Information:

• Delivery Time: 5-7 weeks
• Packaging Details: corrugated box

Product Details:

ETORB2-A=> Tracers probes=> PVC body=> LED signal source=> Turbidity measurement system according to the 90° scattered light method=> Self-cleaning=> Inclined plain sensor surface=> Factory calibrated (“plug and play”)=> Cable/connector 5 m=> ETORB2-IM: immersion probe

Additional Information:

• Delivery Time: 5-7 weeks
• Packaging Details: corrugated box

Product Details:

We are offering Auto pH Controller Dosing Pump to our clients. Pumps come along with inbuild controller and sensors with digital display.

Product Details:

The Auto ORP Dosing System (pH) measures water quality and adds chemicals to ensure that your pool is clean and safe to swim in. Pool water chemistry is regulated automatically – providing consistent levels of water sanitation while using far less chlorine and acid. This means you get a better result – and save money!

 

Efficiency and Control:

• Whenever your pump is running, Auto pH/ORP dosing system is working. The Auto pH/ORP dosing system tests the water continuously and adds precise doses of chlorine and acid as required. The Auto pH/ORP dosing system measures pH (a measure of the acidity of the pool water) and ORP (Oxidation Reduction Potential – a measure of the level of effective chlorine in the water). It is important that both pH and ORP are maintained within a safe range.

Versatility and Value For Money:

• The LCD display shows you the condition of your pool water – and what Auto pH/ORP dosing system is doing about it. There is a simple but versatile control system for operating and programming your Auto pH/ORP dosing system to suit your lifestyle.

Additional Timer Functionality:

• Auto pH/ORP dosing system comes with two additional timed power outlets – which can be used to operate other accessories such as in-floor cleaning systems or pool lighting. Auto pH/ORP dosing system - lets your pool look after you!

Additional Information:

• Port of Dispatch: Ex-Ahmedabad
• Delivery Time: 4-8 Week
• Packaging Details: Corrugated Box

Product Details:

Cooling towers & Industrial water treatment
Efficient measuring system
Complete monthly report
Accurate conductivity control
Pre-assembled skids
Remote Control

Product Details:

CENTURIO control instruments are multiparameter measurement and regulation systems that combine an absolute control and an extreme ease of use with the elegance of the case created by Giugiaro Design.

CENTURIO PRO is a digital control instrument designed for multiparameter control of dosing systems for water treatment. It is equipped with LINUX operating system, high-performance ARM A5 microprocessor and a large color touchscreen display.

It enables you to manage all the main measurement parameters (conductivity, chlorine, pH, ORP, tracers, inductive conductivity, turbidity, disinfectants, dissolved oxygen, chemical levels and mA Input), read and regulate setpoints of the 10 channels. In particular, for each reading channel it has 2 digital setpoints (ON/OFF), 2 proportional setpoints (IS), 1 mA output setpoint and 1 Temperature setpoint; it is also possible to set 6 timers with a maximum of 10 daily schedules each.

CENTURIO can get real-time graphs and has also an high-capacity storage to archive data logs as well as download option via USB port. It is compatible with the exclusive EMEC remote control system ERMES and can be connected to the internet through Ethernet port or WIFI and 3G modules (optional), in order to be remotely regulated and controlled by using any PC, smartphone or tablet and any browser. CENTURIO is also provided with MODBUS serial communication protocol (optional) to be connected with other devices inside RS485 networks.

The new “EASY-MOUNT” mounting system makes the installation of CENTURIO remarkably simple and quick, while its case can be easily opened with side zipper and captive screws.

Additional Information:

• Delivery Time: 5-6 WEEKS
• Packaging Details: CORRUGATED BOX

Product Details:

Anti Legionella Dosing System

• Sanitary hot water lines disinfection
• Easy maintenance
• Automatic re-priming
• Tailor-made solutions
• Custom panels for specific treatments
• Remote Control

Additional Information:

• Delivery Time: 4-5 WEEK
• Packaging Details: corrugated box

Product Details:

JA PRO control instruments are a series of rack mounting (96x96) single reading systems with temperature reading. On/Off, impulsiveproportional and PID are main working modes.It can set and monitor: pH, ORP, chlorine (depending on the probe: total chlorine, free chlorine, chlorine dioxide, hydrogen peroxide,ozone, bromine or paracetic acid) and conductivity (uS/S - Ohm - TDS / PPM) with automatic range and probe / product selection (H3PO4 - H2SO4 - HNO3 - HCl - NaOH - NaCl).

Probes are not included.JA PRO has: 2 setpoints (on/off, proportional), flow alarm, flow sensor stand-by input, 0-20 mA or 4-20 mA output proportional to read value and programmable in the reading range, alarm output.Avalilable low voltage 12VDC or 24VDC power supply. Available IP54 protection cover.JA PRO is equipped with mA module and MODBUS serial communication to be connected to other devices on RS485 networks and TCP/IP MODBUS.

Additional Information:

• Delivery Time: 5-7 week
• Packaging Details: corrugated box

Product Details:

 

 

Additional Information:

• Delivery Time: 4-5 weeks
• Packaging Details: corrugated box

Product Details:

 

Additional Information:

• Delivery Time: 5-6 weeks
• Packaging Details: corrugated box

Product Details:

We offer wide range of sensors for WTP and WWTP applications. 

• pH sensor
• ORP sensor
• Conductivity/ TDS sensor
• Dissolved Oxygen sensor
• Chlorine sensor
• Turbidity Sensor
• Ozone sensor
• Temperature Sensor
• Chlorine Dioxided sensor

Additional Information:

• Production Capacity: 1 weeks
• Delivery Time: ex stock
• Packaging Details: corrugated box packing

Product Details:

Auto or manual Chlorine dosing system for various applications like raw water chlorination, water- waste water (ETP/ STP), cooling tower, pond filtration, pools filtration etc. Dosing of chlorine into water diinfects water, makes it pure, safe and drinkable for human beings. The system is equipped with the sensor which automatically measures the diluted chlorine, controller which ensures adequated dosage of chlorine as per set parameters and dosing pump which work on on-off or poroprtional dosing to ensure right dosage. This chlorine dosing system is checked under various set industrial parameters and ensure precise, perfect dosing. 

Additional Information:

• Delivery Time: 2-4 weeks
• Packaging Details: box or wodden

Product Details:

We are offering EMEC Multi Parameter Controller to our clients.

JA control instruments are a series of rack mounting (96x96) single reading systems with temperature reading, mA module and native modbus (JA PRO). On/Off, impulsive proportional and PID are the main working modes.

It can set and monitor: pH, ORP, chlorine, total chlorine, free chlorine, chlorine dioxide, hydrogen peroxide, ozone, bromine or paracetic acid (depending on the probe) and conductivity with automatic range and select probe / product (Ohm - H3PO4 - H2SO4 - HNO3 - HCl - NaOH - NaCl - TDS / PPM) for best results. Probes are not included.

JA models have: 2 setpoints (on/off, proportional), flow alarm, flow sensor stand-by input, 0-20 mA or 4-20 mA output proportional to read value and programmable in the reading range, alarm output.

Avalilable low voltage 9-18VDC or 18-36VDC power supply and IP54 protection cover.

JA PRO version is equipped with mA module and MODBUS serial communication to be connected to other devices on RS485 networks and TCP/IP MODBUS.

Additional Information:

• Port of Dispatch: Ex-Ahmedabad
• Delivery Time: 4-6 WEEKS
• Packaging Details: Corrugated Box

Product Details:

Dissolved Oxygen Sensor Probe, Dissolve Oxygen Meter With SensorDissolved oxygen probe (fluorescent membrane)EOLUM dissolved oxygen probe measures dissolved oxygen according to the principle of the fluorescence measurement, Range:- 0/20 mg/l O2, pressure:- 10 bar

Additional Information:

• Item Code: EOLUM
• Delivery Time: 5-7 weeks
• Packaging Details: corrugated box