Asha Technocrats

FEATURESEMEC pH electrodes assures long-time stability and accuracy.pH easy-maintenance electrodes provides accurate reading value and fast response, performances required for the most accurate measurements.Single and double junction models are available. pH electrodes double junction models only are suitable for sea-water. Double junction system offers better electrode protection and guarantees a longer service life. Choose double junction models if you are working with materials like sulphide, sulfur and silver.
DURABILITYElectrode’s lifetime is affected by the working conditions: such as temperature, solution type (acid or alkaline). Usually working at room temperature with a weak solution the electrode’s lifetime is around 2 years. Increasing temperature drastically changes the lifetime. Electrodes get old quickly while stocked.
CALIBRATIONWash the electrode and dry it without wipes, just shaking it. Don’t wipe or brush, this would create electrostatic charges that can influence the reading of the electrode. Follow the controller’s electrode calibration procedure, always use new buffer solutions.

Note:- Price mentioned here is relevant with basic model and subjected to change without any prior notice, you are requested not to consider it as a price of product shown in picture/ image. Images are for reference purpose and its price may differ with the price mentioned here. 
==================================
We offer wide range of sensors for WTP and WWTP applications. 

• pH sensor
• ORP sensor
• Conductivity/ TDS sensor
• Dissolved Oxygen sensor
• Chlorine sensor
• Turbidity Sensor
• Ozone sensor
• Temperature Sensor
• Chlorine Dioxided sensor

Note:- Price mentioned here is relevant with basic model and subjected to change without any prior notice, you are requested not to consider it as a price of product shown in picture/ image. Images are for reference purpose and its price may differ with the price mentioned here. 
===============================
EMEC pH electrodes assures long-time stability and accuracy.pH easy-maintenance electrodes provides accurate reading value and fast response,performances required for the most accurate measurements. 
PH sensor for use with an (Emec) dosing pump. Standard equipped with 0.8 m cable. Fixed cable up to 4.5m & 15m available.
Material: EpoxyRange: 0- 14 pHMaximum pressure: 7 barMaximum temperature: 80°CMinimum conductivity: 100 µS

Note:- Price mentioned here is relevant with basic model and subjected to change without any prior notice, you are requested not to consider it as a price of product shown in picture/ image. Images are for reference purpose and its price may differ with the price mentioned here. 
==================================

ETORB2-A=> Tracers probes=> PVC body=> LED signal source=> Turbidity measurement system according to the 90° scattered light method=> Self-cleaning=> Inclined plain sensor surface=> Factory calibrated (“plug and play”)=> Cable/connector 5 m=> ETORB2-IM: immersion probe

Note:- Price mentioned here is relevant with basic model and subjected to change without any prior notice, you are requested not to consider it as a price of product shown in picture/ image. Images are for reference purpose and its price may differ with the price mentioned here. 
==================================

Dissolved Oxygen Sensor Probe, Dissolve Oxygen Meter With SensorDissolved oxygen probe (fluorescent membrane)EOLUM dissolved oxygen probe measures dissolved oxygen according to the principle of the fluorescence measurement, Range:- 0/20 mg/l O2, pressure:- 10 bar